Toro 38371 Snow Blower Manual

The Toro 38371 is a powerful snow blower designed for efficient snow removal. It features a 15-amp electric motor, a 21-inch clearing width, and an adjustable chute that allows you to direct the snow where you want it. The snow blower is lightweight and easy to maneuver, making it ideal for residential use. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: 15-amp motor, 21-inch clearing width, adjustable chute, ergonomic handle, and lightweight design.

Installation

Unpack and inspect contents. Ensure all parts are included.

1. Assemble the handle: Follow the included instructions to attach the handle securely.
2. Check power source: Ensure you have access to a suitable electrical outlet.
3. Plug in the snow blower: Use a heavy-duty extension cord if necessary.

WARNING! Always ensure the snow blower is unplugged when not in use or when performing maintenance.

First-Time Setup

Before operating, familiarize yourself with the controls and safety features.

1. Read the manual thoroughly: Understand all safety precautions and operational guidelines.
2. Check for any loose parts: Ensure everything is tightened and secure.
3. Test the controls: Make sure all buttons and levers function correctly.

CAUTION! Always wear appropriate safety gear when operating the snow blower.

Specifications

• Motor: 15-amp electric.
• Clearing Width: 21 inches.
• Weight: Approximately 35 lbs.
• Chute Rotation: 180 degrees.
• Power Source: Electric, requires a standard outlet.
• Operating Temperature: Recommended above 20°F.

Controls and Settings

Access controls via the ergonomic handle. Key controls include the power switch, chute adjustment lever, and speed control.

Power Switch: Turns the snow blower on and off.

Chute Adjustment: Rotate to direct snow discharge.

Speed Control: Adjusts the speed of the snow blower.

Connecting Power

Ensure the snow blower is connected to a suitable power source before operation.

1. Use a heavy-duty extension cord: Ensure it is rated for outdoor use.
2. Plug into a grounded outlet: Check that the outlet is functioning properly.
3. Keep the cord clear of the snow blower: Avoid tripping hazards.

Tip: Always check the power cord for damage before use.

Operating the Snow Blower

Follow these steps for effective snow removal.

1. Start the snow blower: Turn on the power switch.
2. Adjust the chute: Set the direction of snow discharge.
3. Move forward slowly: Allow the snow blower to clear the snow efficiently.
4. Stop and check: Periodically check for any blockages or issues.

WARNING! Do not attempt to clear blockages while the snow blower is plugged in.

Maintenance

Regular maintenance ensures optimal performance.

1. Clean after each use: Remove snow and debris from the snow blower.
2. Inspect the power cord: Check for any signs of wear or damage.
3. Store properly: Keep in a dry place when not in use.

CAUTION! Always unplug the snow blower before performing maintenance.

Safety Information

Follow all safety guidelines to prevent injury.

• Wear appropriate clothing: Avoid loose clothing that could get caught in the machine.
• Keep children and pets away: Ensure a safe operating area.
• Do not operate in extreme weather: Avoid using in heavy rain or lightning.

Troubleshooting

Reset: Unplug and replug to reset the snow blower.

Service: For further assistance, contact Toro customer service.