Toro 38635 Snow Blower Manual

The Toro 38635 is a powerful snow blower designed for efficient snow removal. With a 15-inch clearing width and a 12-inch intake height, it is perfect for residential use. The snow blower features a 4-cycle engine, adjustable chute, and ergonomic handle for comfortable operation. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating Instructions 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 15-inch clearing width, 12-inch intake height, adjustable chute, ergonomic handle, and 4-cycle engine.

FeatureDescription
Clearing Width15 inches for efficient snow removal
Intake Height12 inches to handle heavy snowfall
Engine Type4-cycle engine for reliable performance
Chute ControlAdjustable chute for directing snow
HandleErgonomic design for comfortable use

Installation

Unpack and inspect contents. Assemble the snow blower according to the manual.

  1. Attach the handle: Align and secure with provided bolts.
  2. Check oil level: Ensure the engine has the correct oil level before starting.
  3. Fuel the engine: Use fresh gasoline as per specifications.
  4. Inspect safety features: Ensure all safety guards are in place.

WARNING! Always read the manual before operating. Ensure all connections are secure.

First-Time Setup

Power on the snow blower; follow the setup instructions in the manual.

  1. Check controls: Familiarize yourself with the control panel.
  2. Adjust chute: Set the chute direction before starting.
  3. Test operation: Run the snow blower in a safe area to ensure functionality.

CAUTION! Ensure stable footing and avoid slippery surfaces while operating.

Specifications

Controls and Settings

Access controls via the control panel. Features include throttle control, chute adjustment, and ignition switch.

Throttle Control: Adjusts engine speed for optimal performance.

Chute Adjustment: Directs snow discharge to desired location.

Connecting Devices

Ensure the snow blower is off and unplugged before connecting any accessories.

  1. Check connections: Ensure all cables are secure.
  2. Use appropriate extension cords if needed.
  3. Follow safety guidelines for electrical connections.

Tip: Always inspect connections before use to prevent accidents.

Operating Instructions

Start the snow blower and adjust settings as needed for optimal performance.

  1. Start the engine: Turn the ignition switch to the ON position.
  2. Adjust throttle: Set to desired speed for snow removal.
  3. Direct snow: Use the chute control to aim snow discharge.
  4. Monitor operation: Keep an eye on performance and adjust as necessary.

WARNING! Do not operate in enclosed spaces; ensure proper ventilation.

Maintenance

Regular maintenance is essential for optimal performance and longevity.

  1. Check oil level: Regularly inspect and change oil as needed.
  2. Clean the snow blower: Remove snow and debris after each use.
  3. Inspect belts and cables: Ensure all components are in good condition.

CAUTION! Always disconnect the spark plug before performing maintenance.

Safety Information

Read all safety instructions before operating the snow blower.

Troubleshooting

SymptomPossible CauseCorrective Action
Engine won't startFuel issueCheck fuel level and quality; ensure choke is set correctly.
Snow blower not clearingClogged chuteStop the engine and clear any blockages.
Excessive vibrationLoose partsInspect and tighten all bolts and screws.
Engine overheatingLow oil levelCheck and refill oil as necessary.

Reset: Follow the manual for resetting operational settings if needed.

Service: For assistance, contact Toro customer service.

Toro 38635 Snow Blower Manual © - All Rights Reserved 2026