Toro 38870 Snow Blower Manual

The Toro 38870 is a powerful snow blower designed to handle heavy snowfall with ease. It features a 21-inch clearing width, a 4-cycle engine, and a 180-degree adjustable chute for optimal snow throwing. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating Instructions 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 21-inch clearing width, 4-cycle engine, adjustable chute, and ergonomic handles.

Feature	Description
Clearing Width	21 inches for efficient snow removal
Engine Type	4-cycle engine for reliable performance
Chute Control	180-degree adjustable chute for directing snow
Ergonomic Handles	Designed for comfort during operation
Headlight	Illuminates the path for nighttime use

Installation

Unpack and inspect contents. Assemble the snow blower according to the manual.

Attach the handles: Use the provided bolts to secure the handles to the main body.
Check oil levels: Ensure the engine oil is filled to the recommended level.
Fuel the engine: Use fresh gasoline as per the specifications.
Inspect safety features: Ensure all safety guards are in place.

WARNING! Always read the manual before operating the snow blower.

First-Time Setup

Power on the snow blower; follow the initial setup instructions.

Check fuel and oil levels before starting.
Adjust the chute direction for optimal snow throwing.
Test the engine start: Pull the starter cord firmly.
Familiarize yourself with the controls and settings.

CAUTION! Ensure the area is clear of obstacles before operating.

Specifications

Engine Type: 4-cycle, gas-powered.
Clearing Width: 21 inches.
Throwing Distance: Up to 30 feet.
Weight: 100 lbs.
Fuel Capacity: 0.8 gallons.
Oil Capacity: 0.5 quarts.
Dimensions: 45 x 22 x 38 inches.

Controls and Settings

Access controls via the handlebar: throttle, chute control, and starter.

Throttle: Adjusts engine speed for different snow conditions.

Chute Control: Rotate to direct snow away from the path.

Connecting Devices

Ensure all connections are secure before operation.

Check fuel and oil connections.
Inspect electrical connections for electric models.
Ensure safety features are engaged.

Tip: Always perform a pre-operation check before use.

Operating Instructions

Follow these steps for effective snow removal.

Start the engine and allow it to warm up.
Adjust the throttle for optimal performance.
Direct the chute to avoid obstacles.
Clear snow in a systematic pattern for efficiency.

WARNING! Do not operate on steep inclines or uneven surfaces.

Maintenance

Regular maintenance is crucial for longevity.

Check oil levels and change regularly.
Inspect the spark plug and replace if necessary.
Clean the chute and auger after each use.
Store in a dry place during off-season.

Safety Information

Always prioritize safety while operating the snow blower.

Wear appropriate clothing and safety gear.
Keep hands and feet away from moving parts.
Do not operate in poor visibility conditions.
Read the manual thoroughly before use.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Engine won't start	Fuel issue	Check fuel level and quality; ensure choke is set correctly.
Snow not clearing	Clogged chute	Stop the engine and clear the chute of any blockages.
Excessive vibration	Loose parts	Inspect and tighten any loose bolts or screws.
Engine overheating	Low oil	Check oil level and refill if necessary.

Reset: Follow the manual for resetting any electronic components.

Service: Contact Toro customer service for assistance.