Toro 39914T Snow Blower Manual

The Toro 39914T is a powerful snow blower designed to handle heavy snowfall with ease. It features a 399cc engine, a 24-inch clearing width, and a 21-inch intake height, making it ideal for residential use. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: 399cc engine, 24-inch clearing width, adjustable chute, and ergonomic handles.

Installation

Unpack and inspect contents. Assemble the snow blower according to the manual.

1. Attach the handles: Use the provided bolts to secure the handles.
2. Check oil levels: Ensure the engine oil is filled to the recommended level.
3. Fuel the engine: Use fresh gasoline as specified in the manual.
4. Inspect safety features: Ensure all safety guards are in place.

WARNING! Always follow safety instructions during assembly.

First-Time Setup

Power on the snow blower; familiarize yourself with controls.

1. Adjust the chute: Set the chute direction before starting.
2. Test the controls: Ensure all controls are functioning properly.
3. Check for leaks: Inspect for any fuel or oil leaks.
4. Read the manual: Review the operation section for best practices.

CAUTION! Ensure all safety features are operational before use.

Specifications

• Engine: 399cc 4-cycle OHV.
• Clearing Width: 24 inches.
• Intake Height: 21 inches.
• Weight: Approximately 200 lbs.
• Fuel Capacity: 3.5 quarts.
• Oil Capacity: 0.6 quarts.
• Starting System: Electric start.
• Warranty: 2 years limited warranty.

Controls and Settings

Access controls via the handle panel. Key controls include the throttle, chute control, and start button.

Throttle: Adjusts engine speed for optimal performance.

Chute Control: Directs snow discharge.

Start Button: Initiates engine start sequence.

Connecting Devices

Ensure all connections are secure before operation.

1. Check fuel and oil levels before starting.
2. Inspect electrical connections for the electric start.
3. Ensure safety features are engaged.

Tip: Always perform a pre-operation check before use.

Operating the Snow Blower

Follow these steps for effective snow removal.

1. Start the engine: Use the electric start button.
2. Adjust the throttle: Set to desired speed.
3. Direct the chute: Use the chute control to aim snow discharge.
4. Clear snow: Move forward and backward as needed.

WARNING! Do not operate on steep inclines or uneven surfaces.

Maintenance

Regular maintenance ensures optimal performance.

1. Check oil levels regularly and change as needed.
2. Inspect the spark plug and replace if necessary.
3. Clean the chute and auger after each use.
4. Store in a dry place during off-season.

CAUTION! Always disconnect the spark plug before performing maintenance.

Safety Information

Read all safety instructions before operating the snow blower.

• Wear appropriate clothing and safety gear.
• Keep hands and feet away from moving parts.
• Do not operate in extreme weather conditions.
• Ensure children and pets are at a safe distance.

Troubleshooting

Reset: Refer to the manual for reset procedures if applicable.

Service: Contact Toro customer service for assistance.